Shanti Bhattacharya

A binary Fresnel Zone Axilens (FZA) is designed for the infinite conjugate mode and the phase profile of a refractive axicon is combined with it to generate a composite Diffractive Optical Element (DOE). The FZA designed for two focal lengths generates a line focus along the propagation direction extending between the two focal planes. The ring pattern generated by the axicon is focused through this distance and the radius of the ring depends on the propagation distance. Hence, the radius of the focused ring pattern can be tuned, during the design process, within the two focal planes. The integration of the two functions was carried out by shifting the location of zones of FZA with respect to the phase profile of the refractive axicon resulting in a binary composite DOE. The FZAs and axicons were designed for different focal depth values and base angles respectively, in order to achieve different ring radii within the focal depth of each element. The elements were simulated using scalar diffraction formula and their focusing characteristics were analyzed. The DOEs were fabricated using electron beam direct writing and evaluated using a fiber coupled diode laser. The tunable ring patterns generated by the DOEs have prospective applications in microdrilling as well as microfabrication of circular diffractive and refractive optical elements.

In the past, UV lithography has been used extensively for the fabrication of diffractive optical elements (DOEs). The advantage of this technique is that the entire structure can be written at one time, however, the minimum feature size is limited to about 1 μm. Many 1-d and 2-d periodic grating structures may not need such fine details but it is essential for diffractive optics with circular structures. This is because the spacing between features typically decreases towards the edge of the element resulting in the smallest feature falling well below 1 μm. 1-d structures such as sub-wavelength gratings will also have smaller feature sizes throughout the structure. In such cases, advanced techniques such as Focused Ion Beam and Electron-beam Lithography are required for the fabrication of finer structures. In this paper, we present results of DOEs fabricated with a focused ion beam system (Nova Nanolab 600 from FEI) directly on a single mode fibre tip. The ability to write DOEs directly on fibre tip is of great importance in fields such as endoscopy and optical trapping. The DOE itself, transforms the laser beam to a phase and intensity profile that matches the requirement. Because it is located directly on the fibre, no extra alignment is required. In addition, the system becomes more compact, which is especially important for applications in the field of endoscopy. The main goal of the present work was to develop the most accurate method for creating the desired pattern (that is, the DOE structure) into an actually working element. Different exposure strategies for writing test structures directly with the ion beam on the fibre tip have been tested and carefully evaluated. The paper will present in detail the initial fabrication and optical test results for blazed and binary structures of 1-d and circularly symmetric Fresnel axicons on optical fibres. © 2014 SPIE.

Subwavelength gratings exhibit attractive polarizing properties and have promising applications in communication, optical information processing, holography, and displays. The fabrication of subwavelength binary gratings for operation as polarizing beam splitters (PBS) at a wavelength of 1550 nm is presented. A simplified modal method was used for the design as well as to predict the efficiencies of the polarization components in each order. Electron beam lithography has been employed for patterning subwavelength grating structures on polymethyl methacrylate (PMMA) resist. The fixed beam moving stage patterning mode is used for patterning gratings with a period of 936 nm and width of 374 nm. The exposure and developing parameters are optimized to realize the grating with the designed feature sizes on PMMA resist. Gratings patterned using the optimized exposure and development parameters match well with the design, except for the height. The performance of the fabricated PBS grating has been evaluated by optical testing. The experimental results match well with the predictions.

This paper describes a simplified mesh generation technique that is based on the finite element method of calculation of beam-shaping diffractive optical elements (DOEs). The mesh generation technique uses the inherent symmetry of the incident beam to generate a mesh. Using the meshes so generated, DOEs that convert a Gaussian intensity beam to one of a specified shape, are calculated. Simulations of the results of such beam-shaping elements will be presented. Such elements have uses in industrial and medical applications where both the shape as well as the intensity distribution on the material that is to be processed is very important. For example, in industrial applications the beam may be used to uniformly heat up a specific area in which case the intensity has to be uniform across the beam. The Gaussian intensity variation of a laser has to be converted to a flat-top beam in order to achieve this. To reiterate, beam shaping refers to changing both the intensity distribution and the shape of the beam. Experimental results of the fabricated gratings will also be presented. These results will include experimental data on the method of additive lithography which can be used to improve the efficiency of DOEs. © 2007 Elsevier GmbH. All rights reserved.