Shunmugam M S

Freeform profiles and surfaces have wider engineering applications. Designers use B-splines, Non-Uniform Rational B-splines, etc. to represent the freeform profiles in CAD, while the manufacturers employ machines with controllers based on approximating functions or splines that can cause deviations in manufactured parts. Deviations also creep in during the manufacturing operations. Therefore the manufactured freeform profiles have to be verified for conformance to design specification. Different points on the profile are probed using a coordinate measuring machine (CMM) and a substitute profile is established from the CMM data for comparison with design profile. The sample points are distributed according to different strategies. In the present work, two new strategies of distributing the points on the basis of curve length and dominant points are proposed considering the geometrical nature of the profiles. Metrological aspects such as probe contact and margins to be provided at the ends have also been included. The results are discussed in terms of form deviation with reference to substitute profile and positional deviation between design and substitute profiles, and compared with results of the strategies suggested in the literature. © 2011 Elsevier Ltd. All rights reserved.

Freeform surfaces have wider engineering applications. Designers use B-splines, Non-Uniform Rational Bsplines, etc. to represent the freeform surfaces in CAD, while the manufacturers employ machines with controllers based on approximating functions or splines. Different errors also creep in during machining operations. Therefore the manufactured freeform surfaces have to be verified for conformance to design specification. Different points on the surface are probed using a coordinate measuring machine and substitute geometry of surface established from the measured points is compared with the design surface. The sampling points are distributed according to different strategies. In the present work, two new strategies of distributing the points on the basis of uniform surface area and dominant points are proposed, considering the geometrical nature of the surfaces. Metrological aspects such as probe contact and margins to be provided along the sides have also been included. The results are discussed in terms of deviation between measured points and substitute surface as well as between design and substitute surfaces, and compared with those obtained with the methods reported in the literature. © 2011 Polish Academy of Sciences. All rights reserved.