Anjan Chakravorty

This paper investigates alternative topologies of silicon germanium heterojunction bipolar transistors designed and fabricated in the state-of-the-art BiCMOS process from STMicroelectronics for improved safe-operating characteristics. Electrical and thermal behaviors of various structures are analyzed and compared, along with a detailed discussion on drawbacks and advantages. The test structures under study are different in terms of emitter-finger layouts as well as the metal stacks in the back-end-of-line. It is observed that the multifinger transistor structures having nonuniform finger lengths with wider area enclosed by the deep trench and higher metallization stacks yield an improved thermal behavior. Therefore, the safe-operating area of multifinger transistors can be extended without degrading the RF performances.

A prior estimate of the impact of thermal resistance from the back-end-of-line (BEOL) metallization layers is crucial for an accurate circuit design and thermally aware device design. This article presents a robust technique to extract the thermal resistance component originating from the BEOL metal layers in silicon germanium heterojunction bipolar transistors (SiGe HBTs). The proposed technique is first tested on data generated using analytical equations and later validated with 3-D TCAD simulation. The results clearly show that the exact contribution of the BEOL to the overall thermal resistance is captured in the proposed approach. Finally, we verified the method using measured data obtained from fabricated SiGe HBT structures using Infineon B11HFC technology. The extracted parameters show reasonable accuracy and consistency across different emitter dimensions and BEOL configurations.

In this brief, we propose a simple approach to extract the contribution of the back-end-of-line (BEOL) layers on the thermal resistance of heterojunction bipolar transistors (HBTs). A finite value of BEOL thermal resistance obtained following our approach confirms a non-negligible heat flow toward BEOL. The proposed extraction technique is validated with iterative solutions and measured data of silicon-germanium HBTs fabricated in the STMicroelectronics B9MW technology.