Options
A canonical geometry to study wall filming and atomization in pre-filming coaxial swirl injectors
Date Issued
01-01-2017
Author(s)
Shanmugadas, K. P.
Indian Institute of Technology, Madras
Abstract
A coaxial twin counter-rotating air swirl prefilming injector with necessary optical access, is developed to visualize and quantify its internal fluid dynamics. This research injector consists of a simplex nozzle arranged at the center of two coaxial counter-rotating radial air flow swirlers, and two transparent coaxial tubes are attached, one each to the primary and secondary air swirl paths. Spray from the simplex nozzle is swirled by the primary air and impinges on the inner tube - the prefilmer, undergoes filming, and convects to the tube tip to form a liquid rim, which is sheared by the counter-rotating swirl into finer droplets. Stage-wise phase Doppler particle analyzer measurements indicate the final spray to be much finer than the simplex nozzle spray after undergoing the above processes. Time resolved laser induced fluorescence (TR-LIF) imaging techniques are applied to visualize the wall filming and primary atomization inside the injector. The simplex nozzle spray velocity under the influence of air swirl flow is measured using stereo-particle image velocimetry. The precessing vortex core from the primary swirl imparts a precessing motion to the simplex spray, which in turn induces a non-uniform filming on the prefilmer. The droplet impingement on the prefilmer leads to splashing and crater formation on the surface. The crater size distribution is obtained and compared to the droplet size of the injector spray before impingement. The film thickness variation on the prefilmer surface and the rim thickness are estimated from planar LIF experiments along with a long distance microscope. The thickness of the liquid rim is identified as a major factor in determining the final droplet size at the injector exit. These are correlated to SMD at the injector exit at different air flow rates.
Volume
36