Options
A resistive sensor readout circuit with intrinsic insensitivity to circuit parameters and its evaluation
Date Issued
01-07-2017
Author(s)
Abstract
A novel readout circuit for interfacing single element resistive sensors is presented in this paper. The proposed scheme is based on a new relaxation oscillator (RO). The RO, along with a timer counter provides a digital output proportional to the resistance of the sensor. The output characteristic of most of the existing readout circuits for resistive sensors suffers from gain, offset, and nonlinearity errors. The sources of errors include various nonideal circuit parameters and their drift. The output of the proposed readout circuit has a special feature that it is not a function of the circuit parameters such as: 1) offset voltages of the opamps and comparators; 2) bias currents of the opamps and comparators; 3) gain of various units employed; 4) ON-resistance of the switches; 5) value or mismatch in the magnitudes of the reference voltages employed; 6) delay of the switches and comparator; 7) leakage current of the switch; and 8) slew rate of the opamp. Such a scheme will be useful for high accuracy measurements, even when the parameters 1)-8) may vary or drift, due to variation in the measurement environment. A prototype of the proposed readout scheme has been developed in the laboratory and the performance has been evaluated under various conditions. The output was found to be linear with a worst-case nonlinearity of 0.05%. Test results from a prototype developed show that the proposed scheme possesses all the features, described above, as expected.
Volume
66