Options
Pump modulated suppression of self pulsing in a pulsed fibre amplifier
Date Issued
01-01-2018
Author(s)
Khan, I.
Indian Institute of Technology, Madras
Indian Institute of Technology, Madras
Abstract
We present an experimental study on the suppression of self pulsing in a single stage pulsed master oscillator power amplifier (MOPA), using pump modulation. Many applications require pulsed lasers operating at low repetition rate. Leaving the pump on for long duration without a seed pulse leads to accumulation of amplified spontaneous emission (ASE) and generation of a self-pulse that can damage the laser. For this experiment, the amplifier was fed with peak seed power of 500 mW having a pulse width and repetition rate of 100 ns and 10 kHz respectively. To study the effect of pump modulation on self-pulsing, we carried out the experiment with both a continuous pump and with a pulsed pump. The output was characterized using a constant fractional discriminator (CFD) that generated TTL pulses, in turn fed to a frequency counter. In case of a continuous pump of 2.4 W, with a low repetition rate of 10 kHz for the seed, we noticed self-pulsing of the MOPA. We obtained a maximum amplified signal output peak power of 162 W, or a pulse energy of 7.91 μJ. A further increase in pump power could lead to permanent damage to the system. In case of pulsed pump, the generated pump pulses were synchronized with the seed laser and had a 50 % duty cycle. The resulting output was again characterized with a CFD and counter. We were able to increase the pump power to 6.5 W with an output peak power of 160 W and pulse energy of 9.37 μJ without any sign of self-pulsing. Thus, using a simple method of pump modulation, we were able to reduce the accumulation of ASE and suppressed the phenomenon of self-pulsing at low repetition rates of the seed laser.
Volume
10683