Options
Electrochemical reduction of CO<inf>2</inf> on electrodeposited Cu electrodes crystalline phase sensitivity on selectivity
Date Issued
01-05-2015
Author(s)
Keerthiga, Gopalram
Viswanathan, Balasubramanian
Indian Institute of Technology, Madras
Abstract
The product distribution of electrochemical reduction of CO2 can be altered by modifying the surface of pure copper by deposition. In this study, chronoamperometric deposition of Cu on Cu (Cu/Cu) was carried out at two different CuSO4 bath concentrations, 0.25 M (high) and 0.025 M (low), termed as Cu/Cu-H and Cu/Cu-L respectively. These deposits were characterized by X-ray diffraction and they vary in their crystal orientation. Pure Cu and Cu/Cu were aligned towards (1 1 1) and (2 2 0) plane with a texture coefficient of 1.2 and 1.7, respectively. Electrodeposited electrodes were tested for the electrochemical reduction of CO2 in KCl electrolyte and the results were compared with that of pure Cu electrode. Electrochemical reduction of CO2 showed methane and ethane, with hydrogen as the byproduct. The product distribution varied with the crystal orientation of Cu electrodes. The maximum Faradaic efficiency of methane was 26% obtained on pure Cu electrode with (1 1 1) and (2 0 0) orientation, whereas Cu/Cu-L with dominating (2 2 0) orientation showed a maximum formation of ethane with Faradaic efficiency of 43%. A possible mechanism of product formation on Cu towards C1 and Cu/Cu towards C2 is also discussed.
Volume
245