Application of seaweed as substrate additive in green roofs: Enhancement of water retention and sorption capacity

Green roof substrates are usually designed to achieve desirable characteristics such as low bulk density, preparation cost, high water holding capacity (WHC), hydraulic conductivity (HC) and airfilled porosity (AFP). However, no importance is given to sorption capacity or leaching potential of substrate. Thus, in the present study, novel attempt was made to incorporate a brown-seaweed (Turbinaria conoides) in growth substrate to enhance the runoff quality from green roofs. The green roof substrate, prepared using 30% perlite, 20% vermiculite, 10% sand, 20% crushed brick, 10% cocopeat and 10% T. conoides, was found to have favourable characteristics such as low bulk density (477.7kg/m3), high WHC (49.5%), AFP (20.5%) and HC (4210mm/h). With the aid of down-flow fixed column, sorption capacity of green roof substrate towards various metal ions (Na, K, Ca, Mg, Al, Fe, Cd, Cu, Cr, Ni, Pb and Zn) was examined and results indicated that the column was able to operate for 1440min at a flow rate of 5mL/min before outlet Ni concentration reached the inlet. Green roof experiments were performed using pilot-scale assemblies with Portulaca grandiflora as vegetation. Under rainfall simulations, it was observed that vegetated-green roof assemblies acted as a sink for various metal ions and produced better runoff. In addition, green roofs buffered acidic rain and delayed runoff generation.